Intelligence against false alarms:

• A special optical system with a software filter against false alarms in motion detectors. Together with professional installation, this ensures high detection accuracy.

Special lenses:

• The pattern of Fresnel lens sections is designed so that the diagrams of infrared radiation of a human being, an animal, and thermal noise show significant differences. The large sections of the lens capture the radiation at the level of the head and trunk of an adult. The smaller sections make the diagram more detailed. MotionCam's lens provides the detector with accurate information about the thermal object in the detection zone and the nature of its movement.

Professional installation:

• Installing MotionCam in the right place, at the best height, and perpendicular to the likely intruder access path ensures an informative thermal diagram. This significantly improves detection accuracy. Professional installation makes the pet immunity feature more effective.

Thermal interference filter:

• The detector instantly analyzes the thermal diagram of the sensor: infrared radiation intensity, heat spot size, movement speed, time spent in the protected area, and other parameters. Ajax engineers have analyzed thousands of IR sensor activations caused by humans, animals and thermal interference and developed SmartDetect. The software algorithm identifies false alarm indications instantly and with extreme accuracy. As a result, the detector reacts accurately in the presence of a human being and does not annoy the user with false alarms.

Temperature compensation:

• Temperature compensation is a software mechanism that maintains the contrast of the thermal diagram even if the ambient temperature is similar to the temperature of the human body. With each temperature measurement in the environment, the detector corrects the PIR sensor data according to the coefficient table stored in its memory. The detector is efficient over the entire operating temperature range.

Sensitivity level:

• With the sensitivity setting, the detector adapts to the conditions in a particular room, considering possible thermal interference or pets. Changing the sensitivity setting affects the markers by which false alarms are filtered out. With low sensitivity, the detector will be less likely to respond to a pet even if it is very active. While with high sensitivity, it will trigger the alarm for any movement in the detection zone. Sensitivity can be set in the Ajax app either on-site or remotely.

Tranquility on demand:

• MotionCam (PhOD) takes only a few seconds to show the actual situation in the facility and dispel the user's doubts in case of an alarm. It takes only one click in the Ajax app to take a picture on demand. In addition, the detector will take a series of photos when it captures motion or when FireProtect or FireProtect Plus fire detectors activate.

Protection of loved ones and valuables:

• When in doubt, system users can check what is happening on site. No need to wait for an alarm. Just open the app, select the detector, and see the situation at home in seconds.

Compatible hub models:

• Hub 2 (2G)
• Hub 2 (4G)
• Hub 2 Plus
• Hub Hybrid (2G)
• Hub Hybrid (4G)
• ReX 2 compatible radio signal repeaters.

Operating frequencies:

• 866.0 866.5 MHz
• 868.0 868.6 MHz
• 868.7 869.2 MHz
• 905.0 926.5 MHz
• 915.85 926.5 MHz
• 921.0 922.0 MHz.

Characteristics:

• Maximum effective radiated power (ERP) Up to 20 mW
• GFSK radio signal modulation
• Communication range: up to 1700 m Between the detector and the hub or signal repeater in the open field. Calculate the communication range of the radio signal in the system
• Encrypted communication All saved and transmitted data are protected by block encryption with dynamic key
• Radio frequency hopping: Radio communication uses frequency hopping to prevent eavesdropping and interference
• Sensor type 1 × PIR sensor
• Motion detection distance: up to 12 m When installed at a height of 2.4 m.
• Motion detection angle: horizontal: 88.5° - vertical: 80°
• Motion detection speed: 0.3 to 2.0 m/s The detector lens must be positioned perpendicular to the path you take when entering the room
• Sensitivity: 3 levels Can be set by a PRO or a user with administrator rights in the Ajax app
• Pet immunity: weight: up to 20 kg - height: up to 50 cm
• Temperature compensation Effective motion detection with temperatures between ?10°C to +40°C
• Photo by alarm: A built-in camera is activated if the detector is engaged and detects motion
• Photo on demand: The user takes a photo at any time or when the detector is engaged (depends on settings). The function is disabled by default settings
• Photo by scenario: The detector camera takes photos automatically when Ajax fire detectors are engaged. The function is disabled by default settings
• Photo resolution: 640 × 480 px - 320 × 240 px (default) - 160 × 120 px Can be set by a PRO or a user with administrator rights in the Ajax app
• IR illumination: For night or low-light shots
• Bulk images: 1 to 5 images with a resolution of 320 × 240 px or 160 × 120 px - 1 to 3 images with a resolution of 640 × 480 px. Can be set by a PRO or a user with administrator rights in the Ajax app
• Anti-tamper alarm: Warning if an attempt is made to detach the detector from the surface or remove it from the mounting panel
• Anti-counterfeiting protection device authentication
• Communication loss of connection: in 36 s Detection time depends on Jeweller settings
• Power supply: 2 × CR123A batteries, 3 V Up to 4 years of battery life
• Dimensions: 135 × 70 × 60 mm
• Weight 167 g
• Operating temperatures: 10°C to +40°C
• Maximum allowable humidity up to 75%
• Protection class IP50
• Color White.

Package Contents:

• 1 MotionCam (PhOD) Jeweller
• SmartBracket mounting panel
• Installation Kit.
• 2 × CR123A Batteries Preinstalled
• Quick Start Guide.