Wireless Motion Detector Ajax Motion Cam Outdoor with Camera 26074
Wireless motion detector Ajax MOTION CAM OUTDOOR with camera for alarm verification. Outdoor installation.
MotionCam Outdoor recognizes intrusions from the first steps on the ground and confirms them with an animated series of photos. The photo-verification allows an immediate assessment of the situation, avoiding worries to users and unnecessary interventions to security companies.
Wireless Motion Detector Ajax Motion Cam Outdoor with Camera 26074
Wireless Motion Detector Ajax Motion Cam Outdoor with Camera 26074
Tax included
Wireless Motion Detector Ajax Motion Cam Outdoor with Camera 26074
Frequently bought together
MotionCam Outdoor features two independent PIR sensors, whose signals are analyzed by LISA's two-step algorithm. As soon as both sensors detect motion, LISA performs correlative spectrum analysis of the signals, allowing you to immediately distinguish real threats from interference.
Whenever MotionCam Outdoor detects motion, LISA analyzes and compares the shapes of the signals from the two sensors in real time. If they are similar, the alarm is triggered.
MotionCam Outdoor cannot be turned off unnoticed, even when the system is turned off. The detector is equipped with anti-masking sensors that react to obstacles, coverage and painting of the target. The hub will take less than a minute1 to detect loss of communication with the detector and notify a monitoring station and users of the problem. The fact that MotionCam Outdoor has been disassembled will be noticed immediately.
Features:
- MotionCam Outdoor is heat resistant up to +60°? cold resistant up to 25°? And to protect the anti-masking system's sensors from rain and snow, we provide a special Hood
- Efficiency at high and low temperatures
- IP55 protective housing
- Rain and snow protection hood included in the kit
- Radio signal range is sufficient to install the detector where it will be most effective. 3-year battery life minimizes maintenance requirements
- Two-way communication up to 1,700 meters
- Receive photos in less than 9 seconds
- Up to 3 years of battery life
- Classification Radio channel electro-optical security detector
- Detector type Wireless
- Installation Outdoor / Indoor
- Recommended installation height 0.8 1.3 m
- Compatibility Hub 2, Hub 2 Plus - Does not work with ReX radio signal repeater
- Sensor Element 2 PIR sensors
- Adjustable motion detection distance, 3 to 15m
- Pet Immunity
- Pets up to a height of 80 cm
- Sensitivity Adjustable, 3 levels
- Viewing angle of the motion detector Horizontal 90° - Vertical 80°
- Camera angle Horizontal 105° - Vertical 50°
- TV distortion (EBU standard) A barrel, 17%.
- Photos in case of alarm Photo resolution: 320 × 176 pixels (default setting) - 640 × 352 pixels
- Series of up to 5 photos
- Infrared illumination for night shooting Available
- Power supply 4 batteries CR123A
- Supply voltage 3 V
- Alarm reception time 0.15 s
- Wings radio technology Transmission of a series of photos Reception time of photos with default setting: up to 9 seconds
- Temperature sensor Available
- Operating temperatures From 25°? to +60°?
- Operating humidity Up to 95%.
- Protection Class IP55
- Anti-tampering Anti-masking - Anti-counterfeiting protection - Inhibition detection - Tamper resistant
- Remote configuration and testing Available
- CRA compatibility CRA connectivity: Contact ID, SIA (DC-09)
- Dimensions 206 × 108 × 93 mm
- Weight 470 g.
Jeweller radio technology:
- Communication range with one hub up to 1,700 m in open spaces
- Two-way communication between hub and device
- Operating frequencies 868.0868.6 MHz3
- Self-adjusting RF output power up to 20 mW
- Dynamic key block encryption
- Detector polling period 12300 s
- Frequency jumps.
Package Contents
- MotionCam Outdoor motion detector
- SmartBracket mounting panel
- Hood
- 4 CR123A batteries (pre-installed)
- Installation kit
- User Manual
Data sheet
- Type:
- Detectors Wireless