Faac Rotor kit automation for rolling shutters perfect 170Kg 109940
FAA 109940
8055195003505
Faac Rotor Kit Perfect Automation kit for rolling shutters up to 170Kg composed by:
- 1 Gearmotor for rolling shutters RL200_220/60 EF 109951
- 1 Key selector with release lever XK30 391456
- 1 electronic control board 200 MPS 790905
- 1 container model E for electronic board 720119
- 1 RP 433 SLH card receiver 787852 (EX 787824)
- 1 XT4 433 SLH LR Four-channel Remote Control 787008 White
- 1 pair of XP20 D adjustable wall-mounted photocells 785102
€303.38
€303.38
Tax included
Tax included
Items Available: 4
Frequently bought together
Specifications of the individual components contained in the Kit:
RL200_220/60 EF 109951 Damper Motor:
- Gearmotor 230V
- Damper shaft diameter 60 mm and 48/42 mm (with adapter)
- Diameter of damper boxes 200/220 mm
- Lifting capacity 180 kg
- Mains voltage 220-240V ~ 50/60Hz
- Max torque 170 Nm
- Working environment temperature -20°C ÷ + 55°C
- Lifting capacity 170 Kg
- Max speed 10 rpm
- Damper shaft diameter 60 mm and 48/42 mm (with accessory code 391452)
- Diameter of damper boxes 200/220 mm
- Max damper height 6 m
- Max damper width 4,5 m
- Operator weight 8 Kg
Key selector with release lever XK30 391456:
- Equipped with 2 key contacts and lever release, burglar-proof
- Type of installation. wall
- Microswitches in exchange: 2
- Contacts rating: 10A / 250V
- Degree of protection IP30
- Compatible with European cylinder DIN 18252
- System type: simple impulse employers
Electronic control board 200 MPS 790905:
Very easy to install. Can be used with RL200, RH200B, RH240 and RH240B gear motors for rolling shutters.
Suitable for the installation of motors with 230V power supply and limit switches directly on the motor.
NOTE: the control unit does not include the waterproof outdoor box.
- Mains supply voltage 220-240V~ 50/60 Hz
- Max motor power 800 W
- Max accessory load 200 mA
- Accessories supply voltage 24V
- Operating logics A, and P
- Pause time Adjustable from 0 to 60 sec
- Inputs on terminal board Open, Close, Stop, Safety on closing, Power supply
- Outputs in terminal board Motor, flasher
- Protection fuses F1 = 10 A 250V~ F3 = 0,5 A 250V~
- Working environment temperature -20°C ÷ +55°C
- Protection degree IP55
Container model E for electronic board 720119:
Faac container type "E", for electronic boards of automation control
- With sealing gasket protection degree IP54
- With cable glands protection degree IP55
- Molded-in clamping screws, with possibility to open the cover also from the side
- External dimensions in cm: 26 x 8,5 x 19,5
- Cover closure with 4 self-tapping screws right or left (removable hinges)
Plug-in RP 433 SLH 787852 receiver:
- Faac plug-in RP1 433 SLH-DS Quick Connect Receiver (compatible with all FAAC electronic equipment equipped with 5-pin quick connect connector, or external utilities via connection to accessory RP relay interface).
Four-channel remote control XT4 433 SLH LR White 787008:
- Faac XT4 four-channel remote control, working frequency 433,92 MHz
- Power supply through 2 lithium batteries 3V CR2032 already included
- Coding type: SLH LR technology (patented by FAAC)
- Equipped with a system with SLH function that allows the cloning of a transmitter of the same type while being rolling code facilitating installation
- Equipped with LR system to increase transmission range
- Number of keys 4
- Color remote control white
- Color black faac writing
Pair of adjustable wall-mounted photocells XP20 D 785102:
- Supply voltage: 24V
- Max distance photocells 20 meters
- Type of installation: wall-mounted
- Degree of protection IP54
- Self-alignment angle: ± 7° (20 m) ± 13,5° (5 m)
- Horizontal orientation angle: -90° +90°
- Dimensions (WxDxH): 41.5 x 42.5 x 130 mm
- Absorbed current: Rx (30 mA) + Tx (20 mA)
- Contacts type: N.C
- Contact rating: 60 VA / 24 W
- Working environment temperature: -20°C ÷ +55°C
There are no reviews
Data sheet
- KIT: Kit Gates
- Type: Motors for roller shutters
- Installation: External
