Fror Shielded Flameproof Cable FROHH2R 6X1 mmq 1 Meter with Yellow Green


9X9 SMS0610HAAAD

Suitable when a special degree of protection against electrostatic and electromagnetic interference is required. Can be installed indoors in normal or humid environments and temporarily outdoors. Not permitted for underground installation.

 

Diameter: 8 mm.

 

Sold by the meter.

The producers of our cables are:

  • Baldassari cavi
  • Icel
  • La Triveneta
  • Prysmian
The delivery of the cable from one manufacturer rather than another is dictated by the availability of the moment. All our cables comply with the relevant legal regulations.  
The right of withdrawal does not apply to this product as the cables are cut according to your personal specifications.
Do you have questions about this product or did you not find what you were looking for? Ask us!

Fror Shielded Flameproof Cable FROHH2R 6X1 mmq 1 Meter with Yellow Green

€2.65
€2.65

Fror Shielded Flameproof Cable FROHH2R 6X1 mmq 1 Meter with Yellow Green

€2.65
Tax included

Fror Shielded Flameproof Cable FROHH2R 6X1 mmq 1 Meter with Yellow Green

€2.65

Buy it within and receive it from Monday, 11 November
Two-year warranty

Features:

  • Conductor: red copper, flexible formation, class 5
  • Insulation: PVC, TI2 quality
  • Core wrapping: polyester tape
  • Screen 1: aluminum/polyester tape
  • Screen 2: red copper wire braid
  • Sheathing: PVC, TM2 quality
  • Color: gray
  • Rated voltage NPI® FROHH2R-450/750 V: Uo/U 450/750 V NPI® FROHH2R-300/500 V: Uo/U 300/500 V
  • Maximum operating temperature: 70°C
  • Minimum operating temperature: -15°C (in the absence of mechanical stress)
  • Maximum short circuit temperature: 160°C
  • Shield transfer impedance: max 100 m /m (100 KHz to 30 MHz)
  • Good resistance to mechanical stress and chemical agents
  • Good flexibility and behavior at low temperatures
  • Minimum laying temperature: 0°C
  • Recommended minimum bending radius: 8 times the cable diameter
  • Maximum recommended tensile stress: 50 N/mm2 of copper cross section

     

Use and type of laying Energy cable suitable for fixed installation in places with fire hazards such as fairs, civil, commercial, public entertainment buildings; in industrial construction limited to laying in pipes and ducts. Cable with rated voltage 300/500 V is suitable only for signaling and control circuits. Suitable when a special degree of protection against electrostatic (aluminum/polyester tape) and electromagnetic (copper braid) interference is required. Can be installed indoors in normal or humid environments and temporarily outdoors. Not permitted for underground installation.

Data sheet

Colour:
Grey
Type:
FROHH2R
Cross-Section:
1mmq
With yellow/green:
Yes
Number of cables:
6