Watts DN20 Brass Y Filter with Stainless Steel Mesh with O-Ring F21NOR20
CZZ F21NOR20
8016466110957
Watts brass Y Filter DN20 with the following characteristics:
- DN20 - 3/4 inch
- With stainless steel mesh
- Plug with O-ring seal
- FF threaded connection, ISO 228
- Kvs 7.2
- Filter capacity 500µm
Watts DN20 Brass Y Filter with Stainless Steel Mesh with O-Ring F21NOR20
€9.15
€9.15
Tax included
Tax included
Items Available: 20
: 14
F21NOR Series Y-filters are impurity collectors: they contain a stainless steel mesh basket that collects whatever is being filtered. It is always a good idea to equip civil and industrial heating and air conditioning systems with filters in order to prevent sand and other coarse impurities such as welding beads, metal shavings, gasket residues, present in the fluid, from creating obstruction or damaging equipment installed downstream such as sanitary faucets water treatment equipment, disconnectors, pressure reducers.
Features:
- Pressure rating PN20 bar (1/2 to 2 inches)
- Maximum operating temperature -10÷120°C
- Body threaded connections DN 1/2÷4 brass CW617N
- AISI 304 stainless steel filter meshes
Operation: The fluid is forced to pass through the filter cartridge from the inside to the outside, and during this passage all impurities suspended in the fluid are retained inside the basket. In the case of saturation of the same, the collected impurities no longer allow the fluid to pass through, and the special construction with reinforced support does not allow the filter to break with the consequent release of impurities to the system.
There are no reviews
Data sheet
- Type: Hydraulic and Dirt Separators, Filters
- Connection: F/F
- Connections: 3/4 inches
