SMISOL PIU copper pipe for plumbing and heating systems Diameter 22 mm 25 meters 0041300
04X 0041300
SMISOL PIU copper pipe for plumbing and heating systems with the following characteristics:
- Diameter: 22 mm
- Thickness: 1.5 mm
- Burst pressure: 20.40 Mpa
- Working pressure: 5.10 Mpa
- Water content: 0.314 m/l
Fields of use: Cold drinking water, Distribution of liquid and gaseous fuels.
25 meter long.
SMISOL PIU copper pipe for plumbing and heating systems Diameter 22 mm 25 meters 0041300
€17.69
€17.69
Tax included
Tax included
Out of stock
Incoming
It is the copper pipe produced in accordance with EN 1057 coated during production with a special polyvinyl chloride (PVC) star sheath. It complies with Ministerial Decree 174/04 (G.U. 166, 17/07/04), which defines the conditions to which materials in contact with drinking water must comply. The original in-line coating process allows for superior malleability compared to similar products on the market, placing it at the top of its class.
It has proven bacteriostatic properties, making it the material particularly suitable for sanitary water networks in order to prevent bacterial proliferation such as Legionellosis. Its absolute impermeability to gases also allows its use for the transportation of liquid and gaseous fuels. In addition, for the protection of the end consumer, in accordance with EU Regulation 305/2011 for construction products (CPR), copper pipes in accordance with EN 1057 produced by SCT, are marked with the CE mark. Further guarantee of compliance with current regulations is provided by obtaining the UNI-IGQ Quality Mark.
Coating characteristics:
- Special stabilized PVC resin coating
- Star section
- Sheathing produced from top-quality virgin granulate
- Excellent resistance to external chemical agents
- Ink marking every meter
Proven and guaranteed stabilized polyvinyl resin coating. Other specific advantages include:
- Reduction or elimination of unsightly and unhygienic moisture stains on walls
- The star section of SMISOL PIU allows absorption of small thermal expansion (coefficient of linear thermal expansion = 0.00168 mm/m°C)
- Protection against damage caused by impact during transport and with installation on site
Internal protection: It undergoes, during production, a patented passivation and stabilization treatment of the internal wall that makes it absolutely reliable, in compliance with the potability parameters required by the European regulations on transported drinking water (European Directive 2020/2184/EU). SMISOL PIU copper pipe has a carbonaceous residue C < 0.06 mg/dm2, which is much lower than that required by the UNI EN 1057 standard, which establishes a carbon content C ? 0.20 mg/dm2.
There are no reviews
Data sheet
- Diameter:
- 22mm
- Type:
- Copper pipes for heating
- Length:
- 25 meters
