Datasensing Inductive Sensor PRX M18 SCH PNP NA with IP67 Plug AK1/AP-3H
DTG AK1/AP-3H
Datasensing PRX M18 SCH PNP NA inductive sensor with M12 plug with the following characteristics:
- Nominal sensing distance: 8 mm
- Operating distance: 0 - 6.48 mm
- Standard M18 flush mounting
- Operating voltage: 10 - 30 VDC
- Housing material: nickel-plated brass
- Connections: M12 plug
- Degree of protection: IP67
Included accessories: 2 M18x1 nuts.
Datasensing Inductive Sensor PRX M18 SCH PNP NA with IP67 Plug AK1/AP-3H
€30.03
€30.03
Tax included
Tax included
Items Available: 13
: 2
Features:
- Output: cable outlet, M12 and plug
- Standard lens: 24x24mm FE360
- Correction factor: copper: 0.40/aluminum: 0.45/brass: 0.50/stainless steel: 0.75
- Thermal drift of Sr: < 10%
- Repeat accuracy: < 5% (UB 24V Ta=23°C ±5°C)
- Standard M18 flush mounting
- Switching frequency: 300Hz
- Operating voltage: 10...30 VDC
- No-load supply current: 20 mA
- Load current: 400 mA
- Leakage current: 10A
- Output voltage drop: 1 V at 400 mA
- Maximum ripple content: 10%
- LED indicators: Output status yellow LED
- Delay before availability: 50ms
- Short-circuit protection
- Reverse polarity protection
- Protection against impulse overvoltage
- Protection against inductive loads
- Mounting: Shielded
- Active head material: PBT
- Tightening torque: 25 Nm
- Operating temperature: -25/+70 degrees
There are no reviews
Data sheet
- Type:
- Sensors
- Degree of protection:
- IP67
