The one-size-fits-all solution:

• The new inverter encapsulates all of FIMER's quality in a lightweight and compact design thanks to technology choices optimized for uniformly oriented installations. All models are enclosed in the same enclosure, achieving high performance with the smallest footprint and are equipped with single MPPT
  
   

Easy to install, quick to configure:

• Plug and Play connectors, on the DC and AC side, as well as wireless communication, make installation easy, fast and safe, without having to open the front of the inverter. The commissioning procedure reduces time-consuming setup time, thus also lowering installation time and cost. Increased ease of use thanks to the user interface that allows access, via any WLAN-compatible device (smartphone, tablet or PC), to all the advanced configuration features of theinverter, including dynamic control of the grid connection and load manager
  
   

Connectivity and digital integration:

• Built-in data logging capabilities and direct data transfer over the Internet (via Ethernet or WLAN) allow customers to enjoy the benefits offered by the Aurora Vision monitoring portal. Advanced communication interfaces (WLAN, Ethernet, RS485), together with an efficient Sunspec-compatible Modbus (TCP/RTU) communication protocol, enable easy integration of the inverter within any smart environment, and with third-party monitoring and control devices. A comprehensive set of commands, with an efficient built-in algorithm, enables dynamic control of grid feed-in (e.g., zero feed-in) making linverter suitable for worldwide applications and compliant with utility regulatory requirements
  
  
   

Energy Viewer:

• This mobile app is a useful tool for residential users who can remotely monitor the performance of their solar systems, enabling them to increase self-consumption and self-sufficiency
  
   

Key features:

• Wireless access to the built-in user interface
• Simplified commissioning procedure
• State-of-the-art design with native wireless connectivity for easy integration into smart buildings and smart grids
• Dynamic control of networking
• Remote firmware update for the inverter and its components
• Remote monitoring via Aurora Vision cloud
  
  
   

Features:


 

Input:

• Maximum absolute DC input voltage (Vmax,abs) 600 V
• Input DC trigger voltage (Vstart) 150 V (adj. 120250 V)
• Input DC voltage operating range (Vdcmin...Vdcmax) 0.7 x Vstart...580 V (min 90 V)
• Rated DC input voltage (Vdcr) 300V
• Rated DC input power (Pdcr) 2500 W
• Maximum DC input power for each MPPT (PMPPTmax) 2500W
• MPPT range of DC voltage (VMPPTmin ... VMPPTmax) at Pacr 210...530 V
• Maximum DC input current (Idcmax) / for each MPPT 10.0A
• Maximum input short-circuit current for each MPPT 12.5A
• Number of input DC connection pairs 1
• DC connection type Quick plug-in PV connector
  
   

Input protections:

• Reverse polarity protection Yes, current limited source.
• Input overvoltage protection - varistor Yes
• Insulation control In accordance with local regulations
• DC disconnect characteristics (DC disconnect version) 25 A / 600 V
  
   

Output:

• Type of AC connection to the grid Single-phase
• Rated AC power output 2000W
• Maximum AC power output 2000W
• Maximum apparent power 2000VA
• Rated AC output voltage 230V
• AC output voltage range 180,,,264V
• Maximum AC output current 10.0A
• Contribution to short circuit current 12.0A
• Rated output frequency 50/60 Hz
• Output frequency range 47...53/57...63 Hz
• Rated power factor and adjustability range > 0.995, adj. ± 0.1 to 1 (inductive/capacitive)
• Total current harmonic distortion < 3%
• Type of AC connections Female panel-mounted connector
  
   

Output protections:

• Anti-islanding protection In accordance with local regulations.
• Maximum external AC overcurrent protection 16A
• Output overvoltage protection - varistor 2 (L - N / L - PE)
  
   

Operating performance:

• Maximum efficiency 96.7%
• Weighted efficiency (EURO/CEC) 95.0%/-
• Power supply threshold 8W
• Nighttime consumption <0.4 W
  
   

Environmental:

• Ambient temperature -25...+60°C /-13...140°F with derating above 50°C/122°F
• Relative humidity 0...100 % with condensation
• Noise emission pressure 50 dBA @ 1 m
• Maximum operating altitude without derating 2000 m / 6560 f
  
   

Physical:

• IP65 environmental protection rating
• Cooling system Natural
• Dimensions (H x W x D) 553 x 418 x 175 mm / 21.8 x 16.5 x 6.9
• Weight 15 kg / 33 lb
• Mounting system Wall brackets
  
   

Safety:

• Isolation level No transformer
• Certifications CE , RCM
• EMC and safety standards IEC/EN 62109-1, IEC/EN 62109-2, AS/NZS 4777.2, EN 61000-6-1,EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 61000-3-2, EN 61000-3-3
• Grid connection standards (check availability through sales channel) IEC 0-21, DIN V VDE V 0126-1-1, VDE-AR-N 4105, G83/2, G59/3, G98-1, G99-1, RD 413, ITC-BT-40, AS/NZS 4777.2, C10/11, IEC 61727, IEC 62116