Elkron IO500 1 input/1 output multipurpose module 80SC3A00121
EKO 80SC3A00121
8033959745342
Multi-purpose 1 input/1 output module Elkron IO500 can perform the function of output module (MU), input for stable dry contacts (LI) or input for pulse contacts (PI).
It allows connecting conventional dry contact (NC/NA) detectors, probes or other devices (license plates, electromagnetic stops, sirens, etc.).
- The module has 1 freely programmable input or 1 freely programmable output
- Power supply: 10 ÷ 24Vdc
- Power consumption: 250uA @ 24Vdc
- Relay output: 1A, 30Vdc
- Resistive load
- Alarm repetition output: 12mA max
- Operating temperature: -5 to 50°C
- Dimensions: 109x91x30 mm
- Relative humidity: 95% max noncondensing
- EN 54 part 18 and 17 certified (1293-CPD-0137)
Elkron IO500 1 input/1 output multipurpose module 80SC3A00121
€74.07
€74.07
Tax included
Tax included
Items Available: 10
: 5
The IO500 multipurpose module with microprocessor and short-circuit isolator is a programmable device that can be configured as:
- actuator output module (MU)
- input module for stable contacts (LI)
- input module for pulse contacts (PI).
Some optional functions related to the selected operation mode can be enabled on the module; programming can be performed directly through ELKRON FAP series control panels.
The factory configuration of the multipurpose module is set as actuator mode 0. IO500 automatically stores, in its nonvolatile memory, the thirty previous and 30 subsequent measurements to an alarm condition. These measurements can be displayed, in graphical or textual form, on the central unit's display. This feature is very important for retrospectively analyzing the condition of the module before and after the alarm condition has been detected.
On the module, in addition to the free contact output (relay), there is a controlled output and an input for external power supply. With the external power supply connected, the controlled output has a maximum current rating of 0.75A@30V; without external power supply, the output assumes the functionality of an alarm repetition output and is limited to 15mA@18V. The two-color LED, under operating conditions, indicates the module status while, in service mode, it can be used to display the module address via a specific function activated by the control panel.
Features:
- Power supply: 10 ÷ 24 Vdc
- Power consumption: 250 uA @ 24 Vdc
- Relay output: 1A, 30 Vdc, resistive load
- Alarm repetition output: 12 mA max, with ext. power supply. 750 mA max
- Operating temperature: -5 °C to +50 °C
- Relative humidity: 95% max noncondensing
- Certified EN54 part 17 and part 18, No. 1293-CPD-0137
There are no reviews
Data sheet
- Type: Expansion Cards
