Honeywell Notifier electromagnetic doorstop 100KG 800N manual release 960119
Honeywell Notifier electromagnetic retainer with 100KG 800N angle adjustable anchor plate for manual release.
Honeywell Notifier electromagnetic doorstop 100KG 800N manual release 960119
Honeywell Notifier electromagnetic doorstop 100KG 800N manual release 960119
Tax included
Honeywell Notifier electromagnetic doorstop 100KG 800N manual release 960119
Honeywell Notifier electromagnetic latch with 800N 100KG angle-adjustable anchor plate for manual release
- Protected against polarity inversion
- Operating voltage 24Vcc
- Holding force 100 Kg
- Degree of protection IP 54
- Dimensions: 110mm x 85mm x 38mm
The door magnets are used as devices to keep open the doors for the 'exclusion of fire protection (fire doors, automatic gates, fire shutters with self-closing mechanisms).
The fire door is usually kept open to allow easy passage and access through busy corridors, etc. Controlled by a fire detection or smoke protection control unit, the latch releases the door when power is interrupted and the door closer located above the door quickly closes the fire door to prevent the spread of flames and smoke through the building.
Integrated into the design, there is a spring-loaded anti-relief pin that provides zero residual holding force when the magnet is de-energised, allowing the fire door to close faster. The door stops have an integrated manual release button that allows the door to close without activating the fire alarm.
All electromagnets are designed to meet the latest requirements of EN1155 and DIN EN 14637.
Advantages:
- Low profile design
- Simple cable entry and exit
- Electronic connection via terminal block
- Door stops have an integrated release button
- The doorstop can be mounted on the wall, floor or ceiling behind the door. Due to the wide range of existing products, almost every kind of requirement can be fulfilled
- The counterpart is the cover (housing) which is mounted on the door
- The doorstop magnets are supplied with a suitable housing
- Electrical protection IP54
- Anti-loss pin
- Integrated reverse polarity and spark suppression diode
- Plastic parts consisting of Bayblend material with 30% glass fibre PA6
Data sheet
- Type:
- Door holders