2P device in two modules for protection of single-phase end-user circuits from overloads and short-circuit currents. Protection against the effects of direct alternating sinusoidal and pulsating ground fault currents. Protection against indirect contacts and additional protection against direct contacts.

 

Curve C, trip threshold from 5 to 10 times In, for application of ohmic-inductive circuits with medium inrush currents. And widely used in domestic installations.

 

A circuit breaker is a safety device that can automatically (i.e., without external intervention) interrupt the flow of electric current in an electrical circuit in the event of an overcurrent.

 

Characteristics:

• Rated current: 16A
• Rated residual current: 300 mA
• Rated short-circuit capacity: 6 kA
• Number of poles: 2
• Input voltage type: AC
• Tripping characteristic: C
• Degree of protection: IP20
• Number of modules: 2
• Rated operating voltage: 230 V
• Rated insulation voltage: 440 V
• Impulse withstand voltage: 4 kV
• Rated extreme short-circuit capacity: 10 kA
• Maximum peak current: 0.25 kA
• Rated frequency: 50 Hz
• Power loss: 4.20 W
• Energy limitation class: 3
• Overvoltage category: III
• Tightening torque: 4 Nm
• Cable size: 35 mm²
• Cable stripping length: 11 mm
• Ambient temperature: In operation -25/+55 degrees
• Pollution degree: 3
• Width: 36 mm
• Height: 86 mm
• Depth: 72 mm