Schneider NG125 OF+SD 1M 19072 Open Closed and Disconnected Contacts
SNR 19072
3303430190721
Schneider NG125 open closed and disconnected contacts with the following characteristics:
- Product or component type: open/closed and disconnected signaling contact
- Rated insulation voltage: 690V AC 50/60 Hz
- Rated impulse withstand voltage: 8 kV
- Mounting mode: fixed
- Mounting medium: DIN rail
Schneider NG125 OF+SD 1M 19072 Open Closed and Disconnected Contacts
€46.29
€46.29
Tax included
Tax included
Items Available: 4
: 1
This Acti9 NG125 electrical auxiliary is an open/close contact and dual taste signaling, DIN-rail mounted. It is dedicated to Acti9 NG125, NG125NA and NG125LMA. It is used for remote indication of the position of the associated device. The 2 changeover contacts indicates the "open" or "closed" position of the associated device and the position of the associated device in case of electrical fault or tripping auxiliary.
Width in steps of 9 mm is 1. Frequency of use is 50 Hz or 60 Hz. Also operates with direct current. Rated operating current In is 1A (mini) to 6A (maxi) depending on the rated voltage. The rated operating voltage Ue is up to 415VAC and 130V DC.
The operating temperature is between -25°C and +60°C. The storage temperature is between -40°C and +85°C. This product complies with IEC/EN 60947-5-1 standards.
Features:
- Rated current: 3 A: 415 V "AC" - "50/60 Hz" - 6 A: <= 240 V "AC" - "50/60 Hz" - 1 A: 130 V DCì - 3 A: <= 48 V DC
- Steps 9 mm: 1
- Electrical life: 10000 cycles
- Wire stripping length: 10 mm
- Tightening torque: 1 Nm
- Pollution degree: 3
- Operating ambient temperature: -25/+60°C
- Storage temperature: -40/+85°C
There are no reviews
Data sheet
- Type: Auxiliary Contacts
