D-Link 24 Port + 4 SFP Gigabit 10/100/1000 Mbps Switch DGS-1510-28P
870 DGS-1510-28P
D-Link 24-port + 4 SFP managed switch with the following features:
- Hardware version: A1
- Number of ports: 24x10/100/1000 Mbit/s, 2 SFP Gigabit, 2 SFP+ 10G
- Packet buffer memory: 1.5 MB per device
- Universal internal power supply 100 to 240 VAC 50/60 Hz
- Dimensions: 440x210x44 mm
- Maximum power consumption: 24 watts
- Standby power consumption: 15.2 Watts
- Acoustics: 43.8 dB(A)
- Heat dissipation: 72,292 BTU/hour
D-Link 24 Port + 4 SFP Gigabit 10/100/1000 Mbps Switch DGS-1510-28P
€831.77
€831.77
Tax included
Tax included
Items Available: 2
: 1
PoE-capable switches offer additional flexibility for companies that want to power IP phones, wireless access points or IP cameras using their existing network infrastructure. The combination of high-bandwidth connections and PoE support make the DGS-1510 series ideal for small and medium-sized business (SMB) environments.
The last two SFP+ ports of the DGS-1510 series switches enable users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using high SFP+ transceiver direct attach cables (DACs) o This creates a total of 288 Gigabit ports, ensuring a fully bandwidth-compatible while maintaining cost efficiency. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure and manage any of the DGS-1510 series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 series offers 10G connectivity to core networks and servers while maintaining high data rates.
The DGS-1510 series provides static routing, allowing you to segment your network workgroups that communicate across VLANs and increase application performance. With these features, you can reduce the load on your core devices, allowing you to create a scalable and efficient network.
Advanced Features:
- Physical stacking of up to 6 devices via two 10G ports
- Ethernet ring protection switching (ERPS)
- Static routing
- Automatic surveillance VLAN
- Automatic voice VLAN
- Loopback detection
- LLDP/LLDP-MED
Security features:
- Access control list (ACL)
- D-Link security engine
- BPDU attack protection
- ARP spoofing prevention
- IP-MAC port association
- DoS attack prevention
- MAC/Web access control without clients
Intuitive management:
- Web-based multilingual user interface
- Integrated SNMP MIB for remote network management systems
- Full CLI support
- Manageability for both IPv4/IPv6 environments
- Dual image support
- D-Link Network Assistant (DNA) utility for easy installation
- Console interface for out-of-band management
- IEEE 802.3az energy-efficient Ethernet (EEE)
- D-Link Green 3.0 energy-saving features
Features:
- Hardware version: A1
- Number of ports: 24x10/100/1000 Mbit/s, 2 SFP Gigabit, 2 SFP+ 10G
- Packet buffer memory: 1.5 MB per device
- Universal internal power supply 100 to 240 VAC 50/60 Hz
- Dimensions: 440x210x44 mm
- Switching capacity: 92 Gbps
- Transmission method: Store-and-forward
- MAC address table: Up to 16,384 entries per device
- MAC address update: Up to 512 static MAC entries
- Maximum packet size of 64 bytes: 68.45 Mpps
- Packet buffer memory: 1.5 MB per device
- Universal internal power supply 100 to 240 VAC 50/60 Hz
- Maximum power consumption: 24 watts
- Standby power consumption: 15.2 watts
- Acoustics: 43.8 dB(A)
- Heat dissipation: 72,292 BTU/hour
- Operating temperature: -5/+50 degrees
- Storage temperature: -20/+70 degrees
- Operating humidity: 0% to 95% without condensation
- Storage humidity: 0% to 95% non-condensing
There are no reviews
Data sheet
- Type:
- Network Switch
- Doors:
- 24
