Weidmuller Pro Bas switching power supply 1F/24VDC 2.5A 2838410000
WEI 2838410000
4064675444107
Weidmuller Pro Bas switching power supply:
- Single phase 1F
- Output voltage 24VDC
- Output current 2.5A
- Input voltage type AC
Weidmuller Pro Bas switching power supply 1F/24VDC 2.5A 2838410000
€58.62
€58.62
Tax included
Tax included
Items Available: 46
: 5
Input:
Current draw in relation to input voltage:
- AC voltage type
- Input voltage 230 V
- Input current 0.61 A
- AC voltage type
- Input voltage 115 V
- Input current 1.01 A
- DC voltage type
- Input voltage 120 V
- Input current 0.54 A
- AC input voltage range 85...264 V AC (thermal drift at 100 V AC)
- AC frequency range 4565 Hz
- DC input voltage range 110...370 V DC (derating at <120 V DC)
- Peak current 40 A @ 230 V AC, 25 °C
- Input fuse (internal) Yes
- Recommended pre-fuse 2 A / DI, fuse 6 A, car. B, circuit breaker - 2...4 A, car. C, circuit breaker
- Connection technique Screw connection
- Cable connection technique Screw connection
- Rated input voltage 110...240 V AC / 120...340 V DC
Output:
- 5.5mF capacitive load
- Continuous output current at Unominal 2.5 A @ 55°C, 1.65 A @ 70°C
- Rated output current to Unom. 2.5 A @ 55 °C
- Residual ripple, peak interruption ? 50 mVpp @ full load
- Parallelability yes, max. 3
- Power output 60 W
- Overload protection Yes
- Reverse voltage protection Yes
- Connection technique Screw connection
- Cable connection technique Screw connection
Mains drop bridging time:
- Mains drop bridging time, min. 20 ms
- Type of AC input voltage
- Input voltage 120 V
- Output current 2.5 A
- Output voltage 24 V
- Mains drop bridging time, min. 40 ms
- Type of AC input voltage
- Input voltage 230 V
- Output current 2.5 A
- Output voltage 24 V
- Output voltage, max. 28 V
- Output voltage, min. 22 V
- Rated output voltage 24 V DC
General data:
- Start +40 °C
- Earth leakage current, max. 3.5 mA
- Housing design Protective insulation, plastic
- Power factor (approx.) 0.45 @ 120 V AC, 0.47 @ 230 V AC
- Degree of effectiveness 90% @ 230 V AC
- Degree of protection IP20
- Operating indicator Green LED
- Mounting position, mounting instructions Horizontal on mounting rail TS35. 50 mm clearance at top and bottom for air circulation. Side-by-side mounting possible without spacing
- Power dissipation, rated load 6 W
- Power dissipation, no-load operation 0.5 W
- Short-circuit protection Yes
- Overtemperature protection Yes
- AC interruption bridging time at Inom. > 80 ms @ 230 V AC / > 20 ms @ 115 V AC
- Humidity 595 % relative humidity, non-condensing
MTBF:
- According to SN 29500
- Operating time (hours), min. 1,397,000 h
- Ambient temperature 40 °C
- Input voltage 230 V
- Power output 60 W
- Duty cycle 100 %
Features:
- Noise emission according to EN55032 Class B
- Shock resistance IEC 60068-2-27 30 g in all directions
- Resistance against vibration IEC 60068-2-6 0.7 g in accordance with EN 50178
- Protection class II
- Corrosion degree 1
- Input/output isolation voltage 3.5 kV
- Depth 85 mm
- Depth (inches) 3.346 inch
- Vertical position 90 mm
- Height (inches) 3.543 inch
- Width 36 mm
- Width (inches) 1.417 inch
- Net weight 259 g
- Storage temperature -40 °C...85 °C
- Operating temperature -25 °C...70 °C
- Humidity 595 % relative humidity, non-condensing
Connection data (input):
- Tightening torque, max. 0.6 Nm
- Tightening torque, min. 0.5 Nm
- Screwdriver blade 0.6 x 3.5
- Number of terminals 2 (L,N)
- Cable connection cross section, AWG/kcmil , max. 12 AWG
- Cable connection cross section, AWG/kcmil , min. 26 AWG
- Cable connection cross section, flexible , max. 6 mm²
- Cable connection cross section, flexible , min. 0.5 mm²
- Cross section of cable connection, rigid , max. 6 mm²
- Cable connection cross section, rigid , min. 0.5 mm²
- Connection technique Screw connection
Connection data (output):
- Tightening torque, max. 0.6 Nm
- Tightening torque, min. 0.5 Nm
- Screwdriver blade 0.6 x 3.5
- Number of terminals 4 (++ / --)
- Cable connection cross section, AWG/kcmil , max. 12 AWG
- Cable connection cross section, AWG/kcmil , min. 26 AWG
- Cable connection cross section, flexible , max. 6 mm²
- Cable connection cross section, flexible , min. 0.5 mm²
- Cross section of cable connection, rigid , max. 6 mm²
- Cable connection cross section, rigid , min. 0.5 mm²
- Connection technique Screw connection
There are no reviews
Data sheet
- Type:
- Power supplies
- Voltage:
- 24V
- Degree of protection:
- IP20
- Amps:
- 2.5A
