Centrifugal electric pump DAB K30/70M HP1 KW0.75 single impeller 102110024

DAB K30/70M Centrifugal Electric Pump HP1 KW0.75 1 inch connection/single impeller 102110024


DAB 60212465 8059893316851

Centrifugal electric pump DAB K30/70M HP1 KW0.75, M IE2 Single-impeller suitable for domestic, civil, industrial and agricultural systems and for transfer, mixing and irrigation applications

 

  • Single-phase power supply 1x220-240V
  • Dimensions: suction connections 1 inch - discharge 1 inch
  • Maximum power 1.3Kw
  • Rated power 0.75kW - HP1
  • Flow rate up to 7.2 m3/h - 120 l/min
  • Current In 6A
  • RPM 2800

 

Electric pump with upgraded version, motor efficiency class IE2.

Do you have questions about this product or did you not find what you were looking for? Ask us!
Centrifugal electric pump DAB K30/70M HP1 KW0.75 single impeller 102110024

DAB K30/70M Centrifugal Electric Pump HP1 KW0.75 1 inch connection/single impeller 102110024

€218.92
€218.92

DAB K30/70M Centrifugal Electric Pump HP1 KW0.75 1 inch connection/single impeller 102110024

€218.92
Tax included

DAB K30/70M Centrifugal Electric Pump HP1 KW0.75 1 inch connection/single impeller 102110024

€218.92

Buy it within and receive it from Wednesday, 11 December
Two-year warranty
Easy return within 14 days

Pumped liquid:

  • Clean, free of solids or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral, close to the characteristics of water

 

 

Characteristics:

  • Liquid temperature range: -10°C to +50°C 
  • Maximum ambient temperature: +40°C 
  • Maximum operating pressure: 6 bar (600 kPa)
  • Degree of protection: IP44
  • Insulation class: F
  • Installation: fixed horizontal or vertical provided the motor is positioned above the pump
  • Cast iron pump body and motor support
  • Technopolymer impeller
  • Carbon/ceramic mechanical seal
  • AISI 303 X10CRNIS 1089 UNI 6900/71 stainless steel shaft with rotor
  • EPDM rubber O-ring seal

 

 

 

 

Construction characteristics

  • Asynchronous type closed and cooled by external ventilation
  • Rotor mounted on oversized ball bearings to ensure quiet operation and durability
  • Built-in thermal overload protection and permanently inserted capacitor in the single-phase version
  • For the protection of the three-phase motor, the use of a motor protection switch in accordance with current standards is recommended
  • Construction according to CEI 2-3 standards
  • Support Cast iron 200 UNI ISO 185
  • Impeller Technopolymer A
  • Motor shaft Stainless steel AISI 416 X12CRS13 UNI 6900/71
  • Mechanical seal Carbon/ceramic
  • Gasket NBR

Data sheet

Type:
Centrifugal Pumps
Model:
Single-stage
Connections:
1 inch