Grundfos Unilift submersible pump AP50B.50.11.A1V 96004598
GRU 96004598
5700391489969
The Grundfos Unilift AP50B.50.11.A1V pump is a reliable solution for drainage of sewage and sewage, designed to offer high and durable performance. Made of stainless steel, it is ideal for domestic, commercial and industrial drainage applications, thanks to the VORTEX impeller that allows pumping water with solids up to 50 mm in diameter:
Max flow rate: 7.78 l/s
Impeller type: VORTEX
Max. Particle size: 50 mm
Ambient temperature limit: 0 ... 40 °C
Connection type: Rp
Connection size: 2 inch
Max installation depth: 2 meters
Electrical cable length: 5 meters
Type of cable plug: SCHUKO
Automatic coupling: Y
Place of installation: Indoor
Liquid temperature range: 0 ... 40 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³.
Grundfos Unilift submersible pump AP50B.50.11.A1V 96004598
€721.41
€721.41
Tax included
Tax included
Out of stock
Incoming
Grundfos Unilift Submersible Pump AP50B.50.11.A1V
- Rugged material: Stainless steel body for strength and long life.
- VORTEX impeller: Suitable for liquids with solid particles up to 50 mm, ideal for surface water, seepage and drains.
- Automatic start/stop system: Equipped with level switch for automatic start and stop.
- Double mechanical seal: With non-toxic intermediate oil chamber for added protection.
- Thermally protected asynchronous motor: With pre-lubricated ball bearings for durable performance
Performance and versatility for drainage and sewage
The Unilift AP50B pump is designed for pumping sewage, surface and seepage water, drains and sewage. The VORTEX impeller and ability to handle solids up to 50 mm make this pump ideal for a variety of drainage applications
Reliable operation and motor protection
Equipped with a double mechanical seal with intermediate dolio chamber, the pump provides excellent protection against wear and liquid ingress. The asynchronous electric motor with class F insulation is thermally protected and ensures a long service life thanks to pre-lubricated bearings.
Detailed technical specifications
- Model: Grundfos Unilift AP50B.50.11.A1V
- Product code: 96004598
- Material: Stainless steel
- Maximum solid body diameter: 50 mm
- Impeller: VORTEX
- Start/stop system: Level switch
- Motor: Asynchronous electric with thermal protection
- Power cable: 5 m
- Stator insulation class: F
- Bearings: Ball bearings, prelubricated for life
Liquid
Liquid temperature range: 0 ... 40 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Techniques
Max flow rate: 7.78 l/s
Impeller type: VORTEX
Max. Particle size: 50 mm
Approvals: CE,RCM,VDE,LGABG,EAC,MORO,UKCA,SEPRO
Material
Pump body: Stainless steel EN 1.4301 AISI 304
Impeller: Stainless steel EN 1.4301 AISI 304
Installation
Ambient temperature limit: 0 ... 40 °C
Connection type: Rp
Connection size: 2 inch
Max. installation depth: 2 m
Automatic coupling: Y
Place of installation: Indoor
Electrical data
Power input P1: 1.75 kW
Motor type 1-phase: PSC
Rated power input - P2: 1.21 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 230 V
Rated current: 8 A
Cos phi - power factor: 0.95
Rated transmission speed: 2760 rpm
Capacitor capacity - run: 20 µF/400 V
Protection class (IEC 34-5): IP68
Insulation class (IEC 85): F
Electrical cable length: 5 m
Type of cable plug: Schuko
There are no reviews
Data sheet
- Type:
- Submersible Pumps
- Model:
- Drainage
- Connections:
- 2 inches
