Kit Protect Ground Charger AC Abb Wallbox Three-phase 22KW with circuit breaker and differential lock
KIT PROTECT22
Protect 22AC Earth AC Wallbox Abb ChargerKit consisting of:
- 1 Earth Charger AC Wallbox Abb Three-phase 22KW with 1 T2 Shutter Socket and RFID Card (1 included) 6AGC082589
- 1 ABB S204 4P 40A 6kA C-type circuit breaker 4 modules S529259
- 1 Abb 40A 30mA differential lock 4-pole B427981
Charging mode Mode 3, level 2. The wallbox is designed for smart charging in homes and businesses. Compatible with the electrical system of homes and buildings.
Kit Protect Ground Charger AC Abb Wallbox Three-phase 22KW with circuit breaker and differential lock
€1,129.98
€1,129.98
Tax included
Tax included
Out of stock
Frequently bought together
The Terra AC wallbox is equipped with a high-precision meter that can be integrated with intelligent building energy management systems, enabling advanced load management capabilities. This allows home and business owners to adjust recharge power as needed to maximize it consistent with maximum cost savings.
For Three-phase T2-T2 recharge cable 7 meters 400V 32A to be ordered (Code 6AGC082537)
Advantages
Prepared for communication with external energy meter for dynamic load management.
Built-in protection
- PE continuity monitoring
- Overcurrent
- Overvoltage
- Undervoltage
- Ground fault, including DC ground fault protection
- Integrated surge protection.
Connectivity
- Ethernet, Bluetooth, WiFi standard on all models
- 4G connectivity (with 3G compatibility) available in some variants
- OCPP 1.6 protocol.
Smart features
- Configuration via ChargerSync APP or ChargerSync web portal
- User authentication via ChargerSync APP or RFID card.
Features:
- Charging mode Mode 3, level 2
- Supply voltage Three-phase 380 415 VAC.
- Power rating and input/output current 22KW / 32A
- TT, TN systems
- Frequency 50 / 60 Hz
- Type of socket Type 2 socket with shutter
- Overvoltage category III
- Energy measurement Integrated (indicative accuracy +/- 2%)
- Weight 2 kg
- Overall dimensions (H x W x D) 320 x 195 x 110 mm
- Degree of protection IP54
- Mechanical shock protection IK10 (IK08+ for operating temperatures of -35 to -30 °C)
- Altitude 2000 meters
- Operating temperature -35°C to + 55°C (with derating)
- Storage temperature from -40 to +80°C
- Wall, floor installation via accessory kit
- Cellular communication with nano SIM slots GSM, 4G, LTE, WCDMA
- Configurable contacts 1 input, 1 output
- OCPP 1.6 software upgrade, ChargerSync web portal or ChargerSync APP
- ChargerSync web portal or ChargerSync APP management and configuration
- Connectivity Wifi, Ethernet (RJ45), Bluetooth, RS485, 4G / 3G
- ChargerSync APP user interface, ChargerSync web portal
- OCPP 1.6 and RS485 communication protocols for energy meter connection
- Status indication 5 LEDs
- Safety standards EN 61851-1: 2019, IEC 62955: 2018
- CE Certifications.
Abb circuit breaker, 4 modules, DIN connection (universal for any switchboard on the market), 4P poles, 40 amperes, breaking capacity 6kA, voltage 400 Vac, curve C.
Features:
- Abb series
- Voltage 400 Vac
- Current In 40A
- Interrupting power Icn 6kA
- Rated frequency 50/60 Hz
- Tripping curve C
- 4 modules
- 4P poles
- Actuator marking I / O
- Contact position indication Red ON / Green OFF
- Height 88 mm
- Width 70 mm
- Depth 69 mm
- Recessed depth 69 mm
- Net weight 0.5 kg
- Degree of protection IP20
Abb circuit breaker DDA204 series with the following features:
- DIN connection (universal for any switchboard on the market)
- 4 modules
- 4 poles
- 40 amperes
- Rated residual current 30mA
- Rated voltage 230/400 Vac
- Type of differential A
Features:
- Abb series
- Rated voltage 230/400Vac
- Rated current In 40A
- Rated residual current 30mA
- Differential type A
- 4 poles
- 4 modules
- Height 93mm
- Width 105mm
- Depth 76 mm
- Net weight 173 gr
There are no reviews
Data sheet
- KIT: Kit Wallbox
- Type: Electric Vehicles Charging
- Power: 22 KW
- Model: Without cable
- Connection: Three-phase
