Siemens Manual call point FDM231-RP FDnet/C-NET S54311-F11-A1
Manual call point with direct activation and two-wire system for all Siemens FDM231-RP cable types, operates via FDnet/C-NET bus with the following features:
- Two-color LED indicator for alarm and test
- Fully resettable via key
- Built-in line separator
- Operating voltage: 12-33 V DC
- Operating current: 180 µA
- Degree of protection: IP44
- Activation type: Type A (direct activation)
Ideal for immediate manual activation of an indoor fire alarm.
Siemens Manual call point FDM231-RP FDnet/C-NET S54311-F11-A1
Siemens Manual call point FDM231-RP FDnet/C-NET S54311-F11-A1
Tax included
Siemens Manual call point FDM231-RP FDnet/C-NET S54311-F11-A1
Siemens FDM231-RP FDnet/C-NET Manual call point
The FDnet/C-NET manual call point offers a reliable and straightforward solution for fire alarm activation. With an immediate activation mechanism and a communication system via FDnet/C-NET, this button is ideal for ensuring rapid response in emergency situations. The plastic component, which can be reset by a simple key, allows intuitive operation and quick reactivation.
Two-color LED system for status and testing
Featuring a two-color LED, the FDnet/C-NET call point visually signals alarm status and test phases, enhancing monitoring clarity. The alarm indicator is easily visible even from a distance, providing enhanced safety for the environment.
Detailed technical features:
- Manual button for FDnet/C-NET detector bus automatically addressable
- Manual button with direct activation
- Two-wire system for all cable types
- Installed alarm indicator (LED)
- Two-color LED for alarm and test
- Direct alarm activation by pressing the plastic component
- With the key, the switch is recharged and is ready for operation again
- External alarm indicator (AI) 1
- Connection terminals 0.281.5 mm2
- Operating temperature -25+65 °C
- Storage temperature -30+65 °C
- Air humidity, non-condensing ?95 %
- FDnet/C-NET communication protocol
- Protection category IP44
- Type A version (direct activation)
Application:
- Suitable for indoor use only
- For wall mounting
- For cable entry in wall and flush mounting in well-accessible locations
Data sheet
- Type: Buttons