Adjustable aluminum bracket for roof tiles for photovoltaic STR0003
IIC STR0003
8028045080971
Adjustable aluminum bracket for roof tiles for photovoltaic with the following features:
- Product shape: C (cold rolled strip)
- Finish: 2B (heat-treated, pickled, skinpassed tape)
- Density: 7.9 g/m3
- Tensile strength: 540 750 N/mm2
- Elongation: 45 % min
- Hardness: 82 HRB
- Maximum load applied with compression test on a 0° inclined plane: 150Kg
- Maximum load applied with compression test on a 20° inclined plane: 150Kg
- Maximum applied load with compression test on a 30° inclined plane: 130Kg
- Compatible profiles: PRT2334, PRT2640, PRT2947
- Profile attachment: bottom
Adjustable aluminum bracket for roof tiles for photovoltaic STR0003
€11.15
€11.15
Tax included
Tax included
Items Available: 2
Frequently bought together
The range of brackets, made of stainless steel or aluminum, allows the mounting of PV modules on any type of tile on the roof. Some models, equipped with transverse and longitudinal adjustment, easily adapt to specific installation conditions with variable rafter size.
The use of each bracket is constrained not only by the type of roof tile but also by the incidental snow and wind loads present at the installation site: in the presence of high loads or large working spans, reinforced brackets with increased thicknesses are used. The range of fixed and adjustable brackets is capable of realizing the different installation cases with any type of tile present on the roof.
There are no reviews
Data sheet
- Type:
- Fixing Accessories
