Riello Sentinel Dual SDU 5000VA/5000W 14 Online UPS Sentinel UPS CSDU5K0AA700RUA

Brand: Riello

Code: RIE CSDU5K0AA700RUA EAN: 8023251006784

Riello Sentinel Dual SDU Uninterruptible Power Supply UPS:

Accessory to be purchased separately Riello Multicom CEI 016 interface card for UPS code YSKCC03A.

€1,954.57

€1,954.57
Tax included

Items Available: 21

Two-year warranty

Easy return within 14 days

Are you a professional ?

Request access to

RIE YSKCC03A

€43.27

Features:

Input:

BYPASS:

Voltage tolerance
V 180 / 264 (selectable in ECO or SMART ACTIVE mode)
Frequency tolerance Selected frequency ±5% (user selectable)
Overload times <110% continuous, 130% for 1 hour, 150% for 10 min, over 150% for 3 seconds

OUTPUT:

BATTERIES:

GENERAL SPECIFICATIONS:

Net weight 45kg
Gross weight 53kg
Dimensions (WxDxH) mm 131x640x448 tower - 19x640x3U rack
Efficiency up to 95% in ON LINE mode, 98% in ECO mode
Protections Overcurrent - short circuit - overvoltage - undervoltage - thermal - excessive battery discharge
Communications USB / RS232 / slot for communication interface / REPO + input contact
Input connection Terminal block
Output sockets Terminal block + 2 IEC 320 C19 - PDIST: Terminal block + 8 IEC 320 - C13 + 2 IEC 320 C19
Standards European Directives: L V 2014/35/EU Low Voltage Directive EMC 2014/30/EU Electromagnetic Compatibility Directive
Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; to RoHS standard
Classification according to IEC 62040-3 (Voltage Frequency Independent) VFI - SS - 111
Ambient temperature for the UPS 0 °C to +40 °C
Recommended temperature for battery life +20 °C to +25 °C
Relative humidity range 5-95% non-condensing
Color Black RAL 9005
Noise level at 1 m (ECO mode) dBA <48
Standard equipment SB cable; handle kit

Sentinel Dual is the best solution for powering Mission Critical electromedical applications and devices that require maximum energy reliability.

Simplified installation:

Possibility of floor installation (tower version) or rack cabinets (rack version). Display panel can be rotated (using the included key);
Low noise (<48 dBA): can be installed in any environment due to high-frequency switching inverter and load-dependent digitally controlled PWM fan;
External bypass option for maintenance-free switching;
Guaranteed operation up to 40 °C (components are designed to operate at high temperatures and are therefore subject to lower stress at normal temperatures);
Built-in IEC output sockets with thermal protection

Operating mode selection:

Functions are programmable via software or manually via the display panel:

ON LINE: efficiency up to 95%;
ECO mode: to increase efficiency (up to 98%), allows selection of LINE INTERACTIVE (VI) technology to power, from the grid, insensitive loads;
SMART ACTIVE: the UPS independently decides the operating mode (VI or VFI) according to the quality of the mains power supply;
STANDBY OFF: the UPS can be set to operate only when mains power is absent (emergency mode only);
Frequency converter operation (50 or 60 Hz).

High-quality output voltage:

High quality even with nonlinear loads (IT loads with crest factor up to 3:1);
High short-circuit current on bypass;
High overload capacity: 150% from inverter (even with no grid);
Filtered, stabilized and reliable voltage (ON LINE double conversion VFI technology according to IEC 62040-3 standard) with atmospheric noise suppression filters;
Load rephasing: UPS input power factor close to 1 and sinusoidal current absorption

Other features:

Selectable output voltage (220/230/240 V);
Dual input power supply configuration (SDU 10000 DI and SDU 10000 DI ER);
Auto restart on mains return (software programmable);
Bypass activation: at power off, the unit automatically switches to bypass mode and battery charging;
Minimum load shutdown;
Low battery warning;
Start up delay;
Total microprocessor and DSP control;
Automatic bypass without interruption;
Use of custom power module
Status indications, measurements and alarms available on standard backlit display;
Digital UPS upgrade (flash upgradeable);
Output outlet protection by resettable thermal switch;
Back feed protection as standard: to prevent power returns to grid;
Manual switching to bypass mode.