The 3000/403 (PoE+ Switch) provides power supply to IP cameras via Cat5/Cat5e cables, has 16 x10/100 Mbps PoE+ (IEEE 802.3af/at) ports, 2 RJ45 10/100/1000 Mbps uplink ports, and 1 SFP 1.2 gigabit combo port (ports 18 and 19 cannot be used simultaneously). If in connecting the switch via port 19 you have no communication, you must move the EXTEND dip-switch and then return it to the desired state.

The3000/403 is a 16-port unmanaged PoE+ Ethernet switch, which are classified as PSE equipment. The 3000/403 can simultaneously transmit data and power supply to a network node. From testing, the 3000/403 was found to be suitable for powering 802.3af/at terminals without generating damage to connected equipment, providing on a single port up to 30 watts. The 3000/403 significantly reduces additional electrical wiring costs for powering remote network devices such as: of wireless LAN access points, video surveillance cameras, etc.

An advanced self-adaptive algorithm allows only PD terminals to be powered, without the risk of causing damage to connected equipment. The power supply will be cut off when the POE equipment is not connected. The 3000/403 automatically identifies POE, speed, duplex requirements and uses Auto Uplink TM type cables.

Features and Benefits:

• Supplies power to surveillance cameras and wireless APs via Cat5 or higher cable
• Standard IEEE802.3af/at power supply for 1~16 ports
• Complies with IEEE 802.3i 10 Base-T standard and IEEE 802.3u 100Base-TX standard
• Flow control: IEEE 802.3x full-duplex standard and half-duplex backpressure standard
• RJ45 self-adaptive 10/100Mbps ports
• Transmission distance up to 100m, up to 250m by activating the EXTEND function (Activating the EXTEND function also automatically activates the VLAN function, i.e., the switch does not route packets between PoE ports so as to speed up routing to and from the Uplink ports; in this case, an NVR needs to be connected only to the Uplink ports in order to see the cameras connected on the PoE ports)
• Auto MDI/MDIX Support.
• Each port complies with electrical discharge regulations
• Maximum total power supply (PoE), 250W
• Single port: Max. 30W
• Support port isolation
• Use of store-and-forward mechanism
• Fanless, natural cooling
• Rack mounting brackets included
• Compact, quiet design
• Zero Configuration feature, the power supply automatically delivers power to the equipment adaptively.
  
  

Features:

• 16 x 10/100M PoE ports with RJ45 copper cable, 2 x 10/100/1000M + 1 SFP 1.2Gbps Ethernet Uplink Ports
• Max Power Output (Watts ) 250W
• Max Power Output per port (Watt ): 15.4/30W
• Supports long transmission up to 250m
• Exchange capacity 9.2Gbps
• Forwarding rate 6.84Mpps