Rinnai INFINITY Natural gas Water heater 14i-Liter for indoor REU-A1420FFU-NG
15O REUA1420FFUENG
Rinnai Infinity 14 instantaneous water heater:
- Domestic water flow rate 14 Liters
- For indoor installation
- Natural gas or propane air version
- L profile
- Energy class A
- Equipped with display for temperature management to degree and self-diagnosis
- Anti-corrosion enameled galvanized steel shell
- Unlimited hot water without temperature fluctuations
- Temperature control to degree
- Flow regulator: constant temperature as the flow rate changes
- Electronic ignition without pilot flame
- Progressive LC code that detects any scale deposits.
In simultaneous operation (10 l/min showers and 4 l/min faucets at a temperature jump <= 25°C) 1 large shower / 1 faucet.
Rinnai INFINITY Natural gas Water heater 14i-Liter for indoor REU-A1420FFU-NG
€846.02
€846.02
Tax included
Tax included
Items Available: 2
Water heaters of the same series
Frequently bought together
Rinnai INFINITY 14i Liters sealed chamber instantaneous domestic methane water heater for installation inside the home. It produces hot water only upon actual demand (only when the tap is turned on). Unlike a kettle, it does not need to keep large quantities of water in stock at high temperatures. This provides great savings in terms of energy costs and water consumption. There is no need to mix the water, which immediately comes out at the desired temperature.
The Infinity domestic water heater is an instant domestic hot water producer:
- It is placed indoors; installation must be completed with ducts to expel exhaust fumes outside the room
- Energy class A. Hot water, produced only against actual demand, wastes no resources. Unlike a storage tank, the instantaneous water heater does not need to keep large quantities of water in stock at high temperatures. This provides great savings in energy costs and water consumption. There is no need to mix the water, which comes out immediately at the set temperature
- The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in high mountains under rarefied air conditions. When the water heater and utilities are far apart and heat loss is generated, the installer can correct the temperature to the degree of use (+1°C to +3°C) by fine-tuning the temperature at the tap. A progressive alert signals any limescale deposits. This allows the installer to have a cleaning done before reaching a possible malfunction.
Advantages:
- Can be combined with solar panels
- Can be combined with recirculation
- Can be combined with storage tank max
- Max 3 additional remote controls
- High Altitude Function: To be set at altitudes above 900mt, allows optimization of combustion even in conditions of reduced air density
- Perfect temperature despite dispersion
- Standard antifreeze down to -15°C
- Ultrathin
- Eco-friendly.
Features:
- Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 15-11
- Indoor noise level (dB) 59
- Indoor Installation / Apartment
- Appliance type Forced flow - Type C
- Min/Max methane heat flow rate (kW) 4.1/27.2
- Water flow rate Δt 25°C Min/Max (l/min) 2/14 (20 l/min with ∆T = 15°C)
- Max operating temperature (°C) 65
- Min activation pressure (bar) 0.1
- Min/Max operating pressure rating (bar) 1 - 8.3
- Normal / stand-by / antifreeze power consumption (W) 55 / 1.5 / 116
- Dimensions Width 373 mm - depth 173 mm - Altez
- Distance between fixing brackets 576mm
- Distance between fixing screws 122mm
- Flue wheelbase 89.2mm
- Weight 14.5Kg.
Fittings:
- Water inlet ½"
- Water outlet ½"
- Gas ½"
There are no reviews
Data sheet
- Type:
- Water heaters
- Model:
- Natural gas
- Installation:
- Vertical
- Capacity:
- 14 Liters
- Energy class:
- A
- Series:
- Infinity
