Water heater Rennai INFINITY 28i Liter sealed chamber with a Methane REUVCM2837FFUDNG

Rinnai Natural gas Water heater INFINITY 28i Liter for indoor REUVCM2837FFUDNG


15O REUVCM2837FFUDNG

Rinnai Infinity 28i instantaneous domestic hot water heater:

 

  • Capacity 28 liters
  • Natural gas or propane air version
  • XL profile
  • Energy class A
  • Equipped with control panel for temperature management to degree and self-diagnosis
  • Anti-corrosion galvanized enameled steel shell
  • Unlimited hot water without temperature fluctuations
  • Flow regulator: constant temperature as the flow rate changes
  • Temperature control to the degree
  • Electronic ignition without pilot flame.

     

In simultaneous operation Utilities (6l/min showers and 4l/min faucets) 4 large shower and 1 Faucet.

  • tagav
  • Do you have questions about this product or did you not find what you were looking for? Ask us!
    Water heater Rennai INFINITY 28i Liter sealed chamber with a Methane REUVCM2837FFUDNG

    Rinnai Natural gas Water heater INFINITY 28i Liter for indoor REUVCM2837FFUDNG

    €1,808.65
    €1,808.65

    Rinnai Natural gas Water heater INFINITY 28i Liter for indoor REUVCM2837FFUDNG

    €1,808.65
    Tax included

    Rinnai Natural gas Water heater INFINITY 28i Liter for indoor REUVCM2837FFUDNG

    €1,808.65

    Buy it within and receive it from Wednesday, 13 November
    Two-year warranty
    Easy return within 14 days

    Rinnai INFINITY 28i Liters sealed chamber methane water heater is an instantaneous type domestic hot water producer for indoor installation with electronic temperature management to the degree via remote control, installable at any point of use and water flow control.

    Corrosion-resistant enameled galvanized steel shell and standard antifreeze down to -20°C. This water heater can operate an external circulator (optional) in domestic systems equipped with domestic hot water recirculation to immediately supply hot water to the desired location, according to "economy" or "comfort" mode at the user's discretion. Infinity 28i can be cascaded with other appliances up to a maximum of 25 units through the use of special "master" electronic boards.

    Overview:

     

    Infinity 28i is the water heater that provides 28 liters/minute of domestic hot water. This water heater is installed inside the room and must be connected to a flue for flue gas discharge to the outside:

     

    • Energy efficiency class A. Infinity 28i is an instantaneous water heater. This means that it produces hot water only when the faucet is turned on. It does not waste energy and thanks to the absence of water stagnation, it avoids the risk of Legionella Pneumophila formation, a respiratory disease that is very risky to our health
    • Each Rinnai indoor water heater is equipped with an on-board, front-mounted control panel, as shown in the photo. From the control you control and change the operation of the water heater at your discretion. An LC code the user notices any limescale deposits, which are harmful to the machine, and can have the technician intervene in time. Infinity has the special feature of controlling the water temperature to the degree. If it is installed far from the utilities and the pipes generate heat loss, the Technician can activate the additional function of perfecting the temperature at the tap: from +1°C to +3°C. Accessory remote controls can be connected to a water heater for maximum comfort.

    Advantages:

    • Can be combined with solar panels
    • Can be combined with recirculation
    • Can be combined with storage tank max lt 1000
    • Max 3 additional remote controls
    • Can be combined in cascade
    • Standard antifreeze down to -20°C
    • Eco-friendly
    • Can be combined with storage tank max lt 1000.

    Features:

    • Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 8 - 18
    • Indoor noise level 67
    • Indoor Installation / Villa - Apartment with multifunction shower, whirlpool / professional installations
    • Appliance type Forced flow - Type C
    • Min/Max methane heat flow rate (kW) 2.8/53
    • Water flow rate Δt 25°C Min/Max (l/min) 1.5/28 (37 l/min with ΔT= 20°C)
    • Max operating temperature (°C) 85
    • Min activation pressure (bar) 0.1
    • Min/Max operating pressure rating (bar) 2.5 - 10
    • Normal / stand-by / antifreeze power consumption (W) 97 / 2 / 120
    • Dimensions: Width 357 mm - Depth 235 mm - Height 583 mm
    • Weight 21 kg
    • Distance between fixing brackets 634.2mm
    • Distance between fixing screws 80mm
    • Flue spacing 105.2mm.

    Fittings:

    • Water inlet ¾"
    • Water outlet ¾"
    • Gas ¾"

    Data sheet

    Type:
    Water heaters
    Model:
    Natural gas
    Installation:
    Vertical
    Capacity:
    28 Liters
    Energy class:
    A
    Series:
    Infinity