ZCS Azzurro Three-Phase HYD Hybrid Inverter 20000W ZSS 2MPPT ZZT-HYD20.0-3PH


PMS ZZT-HYD20.0-3PH

ZCS Azzurro Hybrid Inverter:

 

  • Rated Power Output AC 20000W
  • N. Independent MPPTs/No. strings per MPPT 2/2
  • Connection type/Rated voltage Three-phase 3/N/PE, 220/380, 230/400
  • Integrated DC disconnect switch
  • Communication interfaces RS485 (proprietary protocol), USB , CAN 2.0 (for battery connection), Bluetooth

     

Accessory for remote monitoring (code ZSM-WIFI-USB).

 

Accessory to be purchased separately Azzurro ZCS WECO PACK 6KWH Photovoltaic Storage Battery (code ZZT-BAT-6KWH-W).

Do you have questions about this product or did you not find what you were looking for? Ask us!
ZCS Azzurro Three-Phase HYD Hybrid Inverter 20000W ZSS 2MPPT ZZT-HYD20.0-3PH
€4,732.89
€4,732.89

€4,732.89
Tax included

€4,732.89

Two-year warranty
Easy return within 14 days

Advantages:

  • Automatic management of energy flows from PV, battery and grid
  • Integrated on-board Energy Meter
  • Parallelable
  • Possibility of operation in zero feed-in mode
  • Unit compatible with high voltage lithium battery (200-750V)
  • Stand Alone support mode, ensures continuity of operation and stand-alone operation, both from photovoltaic source and battery, in case of power failure

     

Features:

 

DC input technical data (photovoltaic):

  • Typical DC Power 30000W
  • Maximum DC Power for each MPPT 15000W (600V-850V)
  • N. Independent MPPTs/No. strings per MPPT 2/2
  • Maximum input voltage 1000V
  • Trigger voltage 250V
  • Nominal input voltage 600V
  • MPPT range of DC voltage 180V-960V
  • DC voltage range at full load 450V-850V
  • Maximum input current for each MPPT 25A/25A
  • Maximum absolute current for each MPPT 30A/30A

     

Battery connection technical data:

  • Compatible battery type Lithium-ion (supplied by Zucchetti)
  • Allowable voltage range 180V-750V
  • Number of independent battery channels 2 HV battery channels (configurable as independent or in parallel)
  • Maximum charging/discharging power 20000W
  • Allowable temperature range -10°C/+50°C
  • Maximum charging current per battery channel 25A (35A peak for 60s)
  • Maximum discharge current per battery channel 25A (35A peak for 60s)
  • Charge curve Managed by battery BMS
  • Depth of discharge (DoD) 0%-90% (programmable)

     

AC output (grid side):

  • Rated power 20000W
  • Maximum power 22000VA
  • Maximum current 32A
  • Connection type/Nominal voltage Three-phase 3/N/PE, 220/380, 230/400
  • AC voltage range 184V~276V (in accordance with local standards)
  • Rated frequency 50Hz/60Hz
  • AC frequency range 45Hz~55Hz / 55Hz~65Hz (in accordance with local standards)
  • Total harmonic distortion <3%
  • Power factor 1 default (programmable +/- 0.8)
  • Feed-in limitation Programmable from display

     

EPS (Emergency Power Supply) output:

  • Power output in EPS 20000W
  • Peak apparent power in EPS 22000VA for 60s
  • EPS output voltage and frequency Three-phase 230V/400V 50Hz
  • Current deliverable in EPS (peak) 32A (33A for 60s)
  • Total harmonic distortion 3%
  • Switch time <20ms

     

Efficiency:

  • Maximum efficiency 98.2%
  • PEA efficiency (EURO) 97.7%
  • MPPT efficiency 99.9%
  • Maximum battery charge/discharge efficiency 97.8%
  • Stand-by consumption <15W

     

Protections:

  • Safety protections Anti islanding, RCMU, Ground Fault monitoring.
  • DC reverse polarity protection yes
  • Integrated DC disconnect switch
  • Overheating protection yes
  • Overvoltage Category/Type of Protection Overvoltage Category III / Protective class I
  • Integrated AC/DC Dischargers MOV: Type 2 standard
  • Output overcurrent protection yes
  • Soft Start Battery yes

     

Standard:

  • EMC EN61000-1, EN61000-3
  • Safety standards IEC62109-1, IEC62109-2, NB-T32004/IEC62040-1
  • Grid connection standards Certificates and connection standards available at www.zcsazzurro.com

     

Communication:

  • Wi-Fi/4G/Ethernet communication interfaces (optional not integrated)
  • RS485 (proprietary protocol) integrated,
  • USB , CAN 2.0 (for battery connection), Bluetooth integrated
  • Other inputs RS485 line for external meters (up to 4 meters connectable), 6 digital inputs (5V TTL), direct sensor connection (CT)

     

General Data:

  • Allowable ambient temperature range -30~60 °C
  • Transformerless topology
  • Environmental protection rating IP65
  • Allowable relative humidity range 0~100%
  • Maximum operating altitude 4000m
  • Noise level <45 dB @ 1m
  • Weight 37Kg
  • Cooling Forced convection
  • Dimensions (H*W*D) 515mm*571mm*264mm
  • LED display and APP display
  • Warranty 10 years

Data sheet

Type:
Inverter
Power:
20 to 30KW
Degree of protection:
IP65
Model:
Hybrids
MPPT:
2
Connection:
Three-phase
Contact details of the manufacturer and the responsible person